Warehouse Racking
Warehouse storage racking are usually manufactured using press-lock gratings with angled Z-profile, back stop or locking mechanism, within the wide range of different grating types.
Special characteristics
- higher fire safety
- sprinkler suitability
- direct locking of the gratings
- generally no additional fixing material necessary
- high flexibility in product planning
- optimum utilization of the height
- light and water permeability
- right solution for each situation
Technical Details
Bearing Bar Details
Bearing bar thickness | Bearing bar height | Bearing bar Spacing | Cross bar spacing |
1.5 – 3mm | 25-50mm | 33.33mm | 33.33mm |
|
| 44.44mm | 44.44mm |
|
| 66.66mm | 66.66mm |
Material, Grade & Surface
Material | Grade | Surface |
Steel | S235, S275, S355 | Untreated, Galvanized, Painted |
Stainless Steel | SS304, SS316 | Untreated, Pickled |
Aluminium |
|
|
Flush Fitting Solutions
Angled Z-Profile
- Binding in direction of cross bar standardized with Z-Profile 50/21/12/2 mm as angled bracket
- + optimum utilization of the height
Backstop
- Binding in direction of cross bar standardized with Z-Profile 50/21/12/2 mm and additional upstand as back stop
- + sliding goods are prevented
ZU-Profile
- Binding in direction of cross bar with ZU-Profile 20/70/20/2 mm (alternative with 40 mm edging)
- + additional safety by locking at the supports
Fire Baffles
- Binding in direction of cross bar standardized with Z-Profile and fire baffles
- + higher fire safety (prevents chimney effect)
Overlay Solutions
Locking mechanism
- Binding in direction of cross bar with a deep binding bar
- +15 mm above bearing bar height as a locking mechanism
- + direct locking mechanism in the rack
Double Locking Mechanism
- Binding in direction of bearing bar with deep binding bar
- +15 mm above bearing bar.
- Binding in direction of cross bar with deep binding bar generally
- +10 mm or +15 mm above bearing bar including
- 2 cut outs with 56 x 15 mm as additional locking mechanism
- + double locking mechanism
